Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Connect Tech Inc.

Connect Tech Inc. CANpro/104-Plus Opto

Two Port CAN Controller Card on PC/104plus

500V Optical & Power Isolation For Each CAN Port, -40°C to 85°C Operation
 
Connect Tech Inc. CANpro/104-Plus Opto
  
  • PCI-104 2.2 compliant, two port CAN controller card featuring two independent SJA1000 controllers
  • 16MHz CAN clock
  • 3kV optical isolation for each CAN port from the host system
  • Memory mapped addressing (no jumpers required) to save your system’s valuable I/O space
  • Output slew rate limiting for lower radiated emissions
  • On-board CAN bus termination
  • High input impendence transceivers support over 110 nodes on the bus
  • Decoded address range is configurable for BasicCAN or PeliCAN modes
  • Operating temperature range of -40°C to 85°C
  • ROHS compliant



Datasheet/Manual:

Connect Tech Inc. CANpro/104-Plus Opto datasheet in PDF format Datasheet in PDF format
Connect Tech CANpro/104-Plus Opto manual in PDF format Manual in PDF format
 

Introduction

CANpro/104-Plus Opto offers two powerful NXP SJA1000 CAN controllers and 3kV optical isolation to provide maximum protection for your industrial control applications.

An extension of Connect Tech’s current CAN controller product line, CANpro/104-Plus Opto is based on a PC/104-Plus bus. The design frees up valuable I/O space offering you greater flexibility within your embedded system. For even more I/O, CANpro/104-Plus Opto includes an 8-bit GPIO header.

Dependability, high data rates, network control capabilities and 3kV optical isolation protection make CANpro/104-Plus Opto cards the ideal choice for industrial control applications that are exposed to harsh conditions or environments. Lifetime warranty and free technical support is included.
 
 

Specification

Number of ports:

2 ports

CAN Controllers:

Two CAN 2.0B compliant SJA1000 controllers

Connectors:

Standard: 2 x 10 pin headers
Optional: DB-9

GPIO:

8-bit 3.3V I/O header

I/O Power Outputt:

125mA per port

CAN Controller Clock:

16MHz

PCI Interface:

PLX 9030

Optical/Power Isolation:

3kV for each CAN port from the host system

Decoded Address Range:

Each SJA1000 will have a register space of:
BasicCAN: Full 32 byte
PeliCAN: Full 128 byte

Dimensions:

Fully PCI-104 compliant

Temperature:

Operating Temperature: -40º C to 85º C (-40º F to 185º F)
Storage Temperature: -40º C to 125º C (-40º F to 257º F)

Humidity:

95% non-condensing

Bus Interface:

PC/104-Plus (PCI-104 optional)

Software Compatibility:

Windows 2000/XP/CE/XPe/Vista/7, QNX 4/6, Linux

CAN Transceivers:

Support 1.0 Mbps operation and more than 110 nodes on the bus

System Requirements:

+5V DC 500mA (max.)
Power on CAN connectors may draw up to an additional 1A

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:

Board:

CRG001 CANpro/104-Plus Opto, PCI-104 form factor, 2 ports 3kV optical isolation. RoHS.
CRG001-01 CANpro/104-Plus Opto, PCI-104 form factor, 2 ports 3kV optical isolation, DB-9 cables. RoHS

Please note that boards are supplied with no cables, software or manuals.
Software/manuals are available electronically.

Accessories:

N/A

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2010 Diamond Point International. All rights reserved.