HomeAbout UsContactExhibitionsFeedbackNewsNewsletterOrderingPress ReleasesProductsRSS FeedSupport

Connect Tech Inc. Xtreme I/O ADC-DAC

PCI-104 Analog and Digital Data Acquisition Board

		32 single ended / 16 differential analog inputs with 16-bit resolution, 100ksps sampling rate and a wide input voltage range up to ±10V 4 analog output channels with 16-bit resolution and a wide output voltage range up to ±10V 16-bit bi-directional digital I/O with selectable voltage ranges Built-in temperature auto-calibration PCI-104 and PC/104-Plus options ROHS compliant Datasheet/Manual: Xtreme I/O ADC-DAC datasheet - PDF Xtreme I/O ADC-DAC manual - PDF


Introduction Connect Tech's Xtreme I/O ADC-DAC is an analog and digital peripheral board for the PCI-104 small form factor embedded marketplace. This product is ideal for data acquisition, measurement and control applications. The flexibility of the FPGA technology applied to the Xtreme I/O ADC-DAC enables high functionality integration and customization to meet application requirements. The Xtreme I/O ADC-DAC use 4 ADC IC's which are interfaced to the on-board FPGA. Each of these ADC IC's have an 8-channel multiplexer that allow for the sampling of 8 single ended channels or 4 differential channels. For the optional analog outputs, the Xtreme I/O ADC-DAC uses a 16-bit 4-channel DAC IC which is interfaced to the on-board FPGA. Each of the 4 analog output channels from the DAC can be controlled independently from the DAC command register. Lastly, the Xtreme I/O ADC-DAC has 16-bits of bi-directional GPIO that can be configured to operate with +3.3V or +5V logic levels.

Analog Input & Output Model - DAG003 32 SE/16 Dif Channels of 16 bit analog input 4 Channels 16 bit analog output, 16 bit GPIO	Analog Input Model - DAG004 32 SE/16 Dif Channels of 16/12 bit analog input, 16 bit GPIO

Specification
Analog Inputs
Channels:	32 Single Ended / 16 Differential
Resolution:	DAG003: 16-bit DAG004: 16-bit DAG005: 12-bit (low cost option)
Sampling Rate:	100,000 samples per second
Calibration:	Built in temperature Auto calibration
Protection:	±25V
Input Ranges:	Software-Programmable Input Ranges: 0-5V, 0-10V, ±5V, ±10V
Operating temperature:	-40 to +85°C
Temperature Range:	1LSB INL and DNL over full -40ºC to 85ºC (-40ºF to 185ºF)
Signal-to-Noise Ratio:	87dB
Analog Outputs (DAG003 only)
Channels:	4
Resolution:	16-bit
Output Ranges:	Six Programmable Output Ranges: • Unipolar: 0V to 5V, 0V to 10V • Bipolar: ±5V, ±10V, ±2.5V, –2.5V to 7.5V
Temperature Range:	1LSB INL and DNL over full -40ºC to 85ºC (-40ºF to 185ºF)
Outputs Drive:	±5mA
Digital I/O
General:	16-bit bidirectional I/O
Input/Output Ranges:	Hardware selectable +3.3V or +5V(TTL/CMOS)
High Current:	24mA
General
Form Factor:	PCI-104 Fully PCI 2.0 bus compliant Jumpers not required for configuration or board detection
Dimensions:	Fully PCI-104 compliant: 3.775" x 3.550"
Temperature:	Operating Temperature: -40ºC to 85ºC (-40ºF to 185ºF)
Operating Systems:	Windows, Linux, QNX support API available Device can also be controlled directly from a memory mapped register set in any operating system
Warranty and Support:	Lifetime warranty and free technical support
ROHS Status:	This product is lead free/ROHS compliant.

Ordering Details:
Board:	DAG003 Xtreme I/O ADC-DAC 32 SE/16 Dif Channels of 16 bit analog, 4 Channels 16 bit analog output, 16 bit GPIO DAG004 Xtreme I/O ADC-DAC 32 SE/16 Dif Channels of 16 bit analog, 16 bit GPIO DAG005 Xtreme I/O ADC-DAC 32 SE/16 Dif Channels of 12 bit analog, 16 bit GPIO (low cost version) Please note that boards are supplied with no cables, software or manuals. Software/manuals are available electronically.
Accessories:	N/A
Further Information:	Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.