Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Runcore

Runcore InVincible III PATA SSD Drives

1.8" & 2.5" SLC/MLC PATA/IDE Solid State Flash Drives - 3 Year Warranty

Industrial/military temperature options, 75MB/sec read speed, 35MB/sec write speed
 
Runcore Invincible III SATA 2.5" SSD Drives
  
  • 16GB to 128GB capacities
  • 1.8" and 2.5" versions
  • Extended Temperature -40°C to 85°C
  • Super Wide Temperature -45°C to 95°C option
  • Military Temperature -55 °C to 125°C option
  • SLC flash/MLC flash option
  • Completely solid state
  • Rapid erase/purge function option
  • Max read speed: 75MB/sec
  • Max write speed: 35MB/sec
  • Up to 3 year warranty
  • Appears as a standard hard-disk



Datasheet/Manual:

Runcore Invincible III 1.8 IDE/PATA datasheet in PDF format 1.8" Datasheet in PDF format
Runcore Invincible III 2.5 IDE/PATA datasheet in PDF format 2.5" Datasheet in PDF format

 

Introduction

Runcore's InVincible III 1.8" and 2.5" PATA/IDE interface solid-state drives adopts advanced SSD controller and NAND Flash chip, which is compatible with ATA-7 protocol and support PIO-4, MWDMA-2 and UDMA-5 transfer rate. The product supports is available with the storage capacities ranging from 8GB to 128GB ( SLC support to 64GB) and are ideal for use in medical, automotive, aerospace and other industrial applications operated under complex environment.

The drives are available in three different temperature specifications:

  • Extended Temperature -40°C to 85°C
  • Super Wide Temperature -45 °C to 95°C
  • Military Temperature -55 °C to 125°C
 
 

Specification

Interface:

Interface ATA 7 Standard
Transfer Mode

  • PIO mode (0-4)
  • DMA mode (0~2)
  • Ultra DMA mode(0~5)

Capacity:

SLC flash: 16GB, 32GB & 64GB
MLC flash: 32GB, 64GB & 128GB

Form Factor:

2.5" (2mm pitch, 44 way IDE connector)
1.8" (2mm pitch, 44 way IDE connector)

Performance:

Average Access Time 0.1 msec
Maximum Sequential Read Rate: 160 MB/sec
Maximum Sequential Write Rate: 130MB/sec

Power:

Input Voltage 5V ±5%
Operation Mode: 400mA
Sleep Mode: I:< 150mA

Reliability:

S.M.A.R.T Support
MTBF > 1,000,000 Hours
ECC Correction of 48 bits (min) in 512bytes of data
Data Retention(at 25°C) >10 years

Environment:

Extended Temperature -40°C to 85°C
Super Wide Temperature -45 °C to 95°C
Military Temperature -55 °C to 125°C
Operating Shock 1500G, ( @ 0.5msec half sine wave ), 50G, ( @ 11msec half sine wave )
Vibration 5G Peak, 10 ~ 2000Hz

Physical:

2.5" version: Length 100.2mm, width 69.85mm, height 9.0mm
1.8" version: Length 70mm, width 60mm, height 8mm

Warranty:

MLC: 2 years warranty (with an additional year where drives will be repaired at cost by the manufacturer)
SLC: 3 years warranty (with an additional two years where drives will be repaired at cost by the manufacturer)

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:

Drive:

RCV-III-P2532-MWI RunCore 2.5" Invicible III 32GB PATA MLC SSD, -40°C to 85°C
RCV-III-P2564-MWI RunCore 2.5" Invicible III 64GB PATA MLC SSD, -40°C to 85°C
RCV-III-P2528-MWI RunCore 2.5" Invicible III 128GB PATA MLC SSD, -40°C to 85°C

RCV-III-P2516-SWI RunCore 2.5" Invicible III 16GB PATA SLC SSD, -40°C to 85°C
RCV-III-P2532-SWI RunCore 2.5" Invicible III 32GB PATA SLC SSD, -40°C to 85°C
RCV-III-P2564-SWI RunCore 2.5" Invicible III 64GB PATA SLC SSD, -40°C to 85°C

RCV-III-P1832-MWI RunCore 1.8" Invicible III 32GB PATA MLC SSD, -40°C to 85°C
RCV-III-P1864-MWI RunCore 1.8" Invicible III 64GB PATA MLC SSD, -40°C to 85°C
RCV-III-P1828-MWI RunCore 1.8" Invicible III 128GB PATA MLC SSD, -40°C to 85°C

RCV-III-P1816-SWI RunCore 1.8" Invicible III 16GB PATA SLC SSD, -40°C to 85°C
RCV-III-P1832-SWI RunCore 1.8" Invicible III 32GB PATA SLC SSD, -40°C to 85°C
RCV-III-P1864-SWI RunCore 1.8" Invicible III 64GB PATA SLC SSD, -40°C to 85°C

Options
Replace W with V (super wide) for -45°C to 95°C operation
Replace W with M (military grade) for -55°C to 125°C operation

All drives come in retail packaging.

Accessories:

N/A

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2010 Diamond Point International. All rights reserved.